SEBS SOLUTIONS

Contact TPE Sales Department

Thermoplastic Elastomers based on styrenic block copolymers
Physical alloys between polyolefins (PS/PP/PE) “hard segment” and styrene block polymers (SBS, SEBS, SEPS, SEEPS) “soft segment” with the addition of different fillers, plasticizers and stabilizers.
Hardness: 0A-60D, Density: 0,89-1,25 g/cm3

Grades	Hardness Sh A / Sh D ISO 868 (15 Sec)	Density gr / cm3 ISO 1183 1-A	Tensile Strength Mpa ISO 37	Elongation at Break,% ISO 37	Modulus %100 Mpa ISO 37	Tear Strength Mpa ISO 34-1	Compression set at 72h 23C ISO 815 typeB	Compression set at 22h 70C ISO 815 typeB
ENSOFT SD141-50A	50	1,1	6,1	720	1,3	31	18	33
ENSOFT SD141-60A	60	1,08	8,2	650	1,7	30	18	41
ENSOFT SD141-70A	70	1,1	8,5	680	2,5	42	24	44
ENSOFT SD141-80A	80	1,08	11	650	3,2	44	28	55
ENSOFT SD141-90A	90 A	1,1	12,3	620	5,2	67	35	64
ENSOFT SD141-40D	40 D	1,08	12	600	8	–	–	–

Grades	Hardness Sh A ISO 868 (15 Sec)	Density gr / cm3 ISO 1183 1-A	Tensile Strength Mpa ISO 37	Elongation at Break,% ISO 37	Modulus %100 Mpa ISO 37	Tear Strength Mpa ISO 34-1	Compression set at 72h 23C ISO 815 typeB	Compression set at 22h 70C ISO 815 typeB
ENSOFT SD161-40A	40	1,18	6,5	750	0,6	21	17	36
ENSOFT SD161-50A	50	1,18	5,1	710	1,2	29	20	37
ENSOFT SD161-60A	60	1,18	7,5	700	1,5	27	24	37
ENSOFT SD161-70A	70	1,18	8,2	650	2,4	40	27	49
ENSOFT SD161-80A	80	1,18	9,5	650	2,7	38	24	43
ENSOFT SD161-90A	90 A	1,18	12	540	3,9	45	38	44
ENSOFT SD161-40D	40 D	–	–	–	–	–	–	–

Grades	Hardness Sh A ISO 868 (15 Sec)	Density gr / cm3 ISO 1183 1-A	Tensile Strength Mpa ISO 37	Elongation at Break,% ISO 37	Modulus %100 Mpa ISO 37	Tear Strength Mpa ISO 34-1	Compression set at 72h 23C ISO 815 typeB	Compression set at 22h 70C ISO 815 typeB
ENSOFT SD300-90A	90 A	0,9	17	>700	3,8	75	31	50
ENSOFT SD320-40D	40 D	0,98	17	>550	7,5	75	–	–

Grades	Hardness Sh A ISO 868 (15 Sec)	Density gr / cm3 ISO 1183 1-A	Tensile Strength Mpa ISO 37	Elongation at Break,% ISO 37	Modulus %100 Mpa ISO 37	Tear Strength Mpa ISO 34-1	Compression set at 72h 23C ISO 815 typeB	Compression set at 22h 70C ISO 815 typeB
ENSOFT SD300-60A	60 A	0,89	8,5	700	1,7	35	–	–
ENSOFT SD300-70A	70 A	0,89	18,2	830	2,94	42,1	–	–
ENSOFT SD300-80A	80	0,9	17	>700	3,8	75	43	50
ENSOFT SD320-60A	60	0,98	8,5	750	1,7	36	16	35
ENSOFT SD320-70A	70	0,98	9,2	720	2,7	42	18	42
ENSOFT SD320-80A	80	0,97	15	690	3,9	65	31	49

Application	Density	Ravago Code
		1,22	SL-574-40D-V0-000
		1,22	SL-574-70A-F0-000
ENSOFT	Extrusion	1,22	SL-574-90A-F0-000
		1,32	SL-584-60A-F0-000
		1,32	SL-584-75A-F0-000

Application	Density	Ravago Code
		1,02	SD-535-35D-F2-000
		1,02	SD-535-50A-F2-000
		1,02	SD-535-60A-F2-000
ENSOFT	Extrusion	1,02	SD-535-70A-F2-000
		1,02	SD-535-80A-F2-000
		1,02	SD-535-90A-F2-000

Application	Density	Ravago Code
		1,17	SL-154-50A-T2-000-EXT
		1,17	SL-154-55A-T2-000-EXT
		1,17	SL-154-60A-T2-900-EXT
		1,17	SL-154-65A-T2-000-EXT
ENSOFT	Extrusion & Injection Molding	1,17	SL-154-70A-T2-000-EXT
		1,17	SL-154-75A-T2-000-EXT
		1,17	SL-154-80A-T2-000-EXT
		1,17	SL-154-85A-T2-000-EXT
		1,17	SL-154-90A-T2-000-EXT

Application	Density	Ravago Code
		0,94	SO-219-30A-T2-000-FCA
		0,94	SO-219-35A-T2-000-FCA
		0,94	SO-219-40A-T2-000-FCA
		0,94	SO-219-45A-T2-000-FCA
ENSOFT	Injection	0,94	SO-219-50A-T2-000-FCA
		0,94	SO-219-55A-T2-000-FCA
		0,94	SO-219-60A-T2-000-FCA
		0,94	SO-219-65A-T2-000-FCA
		0,94	SO-219-70A-T2-000-FCA
		0,94	SO-219-75A-T2-000-FCA
		0,94	SO-219-80A-T2-000-FCA

Application	Density	Ravago Code
		0,90	SX-201-25A-T2-000
		0,90	SX-201-30A-T2-000
		0,90	SX-201-40A-T2-000
		0,90	SX-201-50A-T2-000
ENSOFT	Highflow Injection	0,90	SX-201-55A-T2-000
		0,90	SX-201-60A-T2-000
		0,90	SX-201-65A-T2-000
		0,90	SX-201-70A-T2-000
		0,90	SX-201-75A-T2-000
		0,90	SX-201-80A-T2-000

Application	Density	Ravago Code
RAVATECH	Injection	1,1	RO-249-30A-T2-000
		1,1	RO-249-35A-T2-000
		1,1	RO-249-40A-T2-000
		1,1	RO-249-45A-T2-000
		1,1	RO-249-50A-T2-000
		1,1	RO-249-55A-T2-000
		1,1	RO-249-60A-T2-000
		1,1	RO-249-65A-T2-000
		1,1	RO-249-70A-T2-000
		1,1	RO-249-75A-T2-000
		1,1	RO-249-80A-T2-000

Application	Density	Ravago Code
		1,1	RO-249-30A-T2-000
		1,1	RO-249-35A-T2-000
		1,1	RO-249-40A-T2-000
		1,1	RO-249-45A-T2-000
		1,1	RO-249-50A-T2-000
RAVATECH	Injection	1,1	RO-249-55A-T2-000
		1,1	RO-249-60A-T2-000
		1,1	RO-249-65A-T2-000
		1,1	RO-249-70A-T2-000
		1,1	RO-249-75A-T2-000
		1,1	RO-249-80A-T2-000

More Information

ENSOFT- SO16160A

See More

Dynamically vulcanized ethylene/propylene/diene (EPDM) and polypropylene (PP) blends

Unsaturated styrenic block copolymer, SBS (styrene-butadiene-styrene) based compounds

TPO compounds are resin blends of polypropylene (PP) and un-crosslinked EPDM rubber and polyethylene.