
Enflex-V® is our brand name for dynamically vulcanized ethylene/propylene/diene (EPDM) and Polypropylene (PP) blends. Fully cured EPDM particles that are homogenously distributed in the thermoplastic polypropylene phase give these compounds unique rubber-like properties, with the advantage of thermoplastic processing techniques.
Enflex-V® range can be self-colored with the use of proper MB or provided as pre-colored compounds.
Key Properties
- Hardness range from 45 Shore A to 60 Shore D
- Service Temperature: -50°C – +125°C (dynamic) -50- + 135°C (Static/Peak)
- Excellent ozone, UV and weather resistance due to saturated elastomeric phase
- Chemical resistance to aggressive mediums
- Very Low (Rubberlike) compression set and good elasticity (that does not change significantly over time) in a wide temperature range
Grades | Hardness Sh A / Sh D ISO 868 (15 Sec) | Density gr / cm³ ISO 1183 1-A | Tensile Strength Mpa ISO 37 | Elongation at Break,% ISO 37 | Modulus %100 Mpa ISO 37 | Tear Strength Mpa ISO 34-1 | Compression set at 22h 70C ISO 815 typeB |
---|---|---|---|---|---|---|---|
ENFLEX VL120-60A | 60 A | 0,97 | 5,1 | 530 | 2,1 | 19 | 28 |
ENFLEX VL120-70A | 70 A | 0,97 | 6,7 | 540 | 2,8 | 25 | 36 |
ENFLEX VL120-80A | 80 A | 0,97 | 8,7 | 550 | 3,9 | 33 | 48 |
ENFLEX VL120-40D | 40 D | 0,94 | 18 | 600 | 8,9 | 80 | 53 |
Grades | Hardness Sh A / Sh D ISO 868 (15 Sec) | Density gr / cm³ ISO 1183 1-A | Tensile Strength Mpa ISO 37 | Elongation at Break,% ISO 37 | Modulus %100 Mpa ISO 37 | Tear Strength Mpa ISO 34-1 | Compression set at 22h 70C ISO 815 typeB |
---|---|---|---|---|---|---|---|
ENFLEX VU420-60A | 60 A | 0,97 | 5,5 | 550 | 1,5 | 27 | 32 |
ENFLEX VU420-70A | 70 A | 0,97 | 7 | 550 | 2,6 | 41 | 38 |
ENFLEX VU420-80A | 80 A | 0,97 | 8,8 | 630 | 3,9 | 60 | 44 |
ENFLEX VU420-40D | 40 D | 0,97 | 16 | 670 | 8,2 | 105 | 55 |
VU420-65A-T1-765 | 65 A | 0,97 | 6,9 | 550 | 2,2 | 39 | 37 |
Application | Density | Ravago Code | |
---|---|---|---|
1,35 | VM-564-85A-F0-000 | ||
1,35 | VO-564-65A-F0-000 | ||
1,25 | VO-574-70A-F0-000 | ||
1,25 | VO-574-80A-F0-000 (UL listed) | ||
1,25 | VO-584-40D-F0-000 (UL listed) | ||
ENFLEX | Injection/Extrusion | 1,25 | VO-584-60A-F0-000 |
1,25 | VO-584-90A-V0-000 | ||
1,04 | VL-545-35D-F0-000 | ||
1,04 | VL-545-60A-F0-000 | ||
1,04 | VL-545-70A-F0-000 | ||
1,04 | VL-545-80A-F0-000 | ||
1,04 | VL-545-90A-F0-000 |

Most TPV products on the market are moisture sensitive. We have recently developed a new proprietary cure system and manufacturing process to make non- hygroscopic TPV products. Since these products are not hygroscopic, they do not need drying prior to thermoplastic processing.
They also exhibit improved color with low yellowness for the ability to color match a wide range of colors with very little variation or color drift.
These new materials have good oil resistance and mechanical resilience properties that are superior to other TPV materials.
Key Properties
- Hardness from 55 to 85 Shore A
- Very high fluidity
- Non-hygroscopic – no need to dry before processing
- Easier coloring (less MB)
- Faster cycle time & easier processing
Grades | Hardness Sh A / Sh D ISO 868 (15 Sec) | Density gr / cm³ ISO 1183 1-A | Tensile Strength Mpa ISO 37 | Elongation at Break,% ISO 37 | Modulus %100 Mpa ISO 37 | Tear Strength Mpa ISO 34-1 | Compression set at 22h 70C ISO 815 typeB |
---|---|---|---|---|---|---|---|
EZPRENE VL320-60A | 60 A | 0,96 | 5 | 550 | 1,9 | 30 | 37 |
EZPRENE VL320-70A | 70 A | 0,96 | 7,2 | 570 | 2,8 | 45 | 33 |
EZPRENE VL320-90A | 90 A | 0,96 | 10 | 570 | 5,8 | 77 | 47 |
Grades | QB36 Approval Class | Color | Hardness Sh A ISO 868 (15 sec) | Density gr / cm³ ISO 1183 1-A | Tensile Strength Mpa ISO 37 | Elongation at Break,% ISO 37 | Compression set at 22 h 70C ISO 815-1 |
---|---|---|---|---|---|---|---|
EZPRENE VL321-65A-T4-000C | 4,5 | NATURAL | 65 | 0,97 | 8 | 650 | 35 |
EZPRENE VL321-65A-T4-766C | 4,5 | GREY | 65 | 0,97 | 8 | 650 | 35 |
EZPRENE VL321-65A-T4-900C | 4,5 | BLACK | 65 | 0,97 | 8 | 650 | 35 |
ENSOFT SD141-60A-T2-000 | 5 | NATURAL | 60 | 1,08 | 7 | 750 | 35 |
Grades | Hardness Sh A / Sh D ISO 868 (15 Sec) | Density gr / cm³ ISO 1183 1-A | Tensile Strength Mpa ISO 37 | Elongation at Break,% ISO 37 | Modulus %100 Mpa ISO 37 | Tear Strength Mpa ISO 34-1 | Compression set at 22h 70C ISO 815 typeB |
---|---|---|---|---|---|---|---|
EZPRENE VU320-60A | 60 A | 0,97 | 7 | 650 | 1,5 | 27 | 37 |
EZPRENE VU320-70A | 70 A | 0,97 | 7,5 | 700 | 2,3 | 37 | 39 |
EZPRENE VU320-90A | 90 A | 0,97 | 15 | 650 | 4,5 | 40 | – |
Application | Density | Ravago Code | |
---|---|---|---|
0,9 | VX-201-55A-T2-000 | ||
0,9 | VX-201-60A-T2-000 | ||
EZPRENE | Highflow Injection | 0,9 | VX-201-65A-T2-000 |
0,9 | VX-201-70A-T2-000 | ||
0,9 | VX-201-75A-T2-000 |